Academic Studies and Further Education
At the Technical University of Vienna I obtained my diploma as a chartered engineer in Industrial Electronics and Control. Fascinated by the first Apple II computers, I also followed many lectures in computer science.
Later on I was able to draw on my early knowlege in Pascal while implementing production line control algorithms. On behalf of the Institue of Mechanics I tutored fellow students in statics. This involvement in mechanical engineering came very handy for my later job as design leader.
My employer Semperit Reifen AG offered a post-graduate study in rubber technology at the Leibnitz University in Hannover, Germany.
Polyers have fascinating properties on the borderline of solids and liquids. Their theory overlaps chemistry, physics and mechanics. This course is a unique opportunity to get a good grasp on the basics of this specialty.
Understanding visco-elastic behaviour of high-molecular weight polymers helped a lot in developing control software for a fast-paced splicer, but also in designing production lines for the tire industry.
This background was a solid foundation for my work in chemical plant design as well, such as e.g. coping with exothermal polyerisation.
In order to widen my horizon beyond technical topics I undertook a two-year study in Klagenfurt, Austria towards an MBA in Finance Management.
Financial mathematics and investment calculations came in quite handy when I led the turn-key development of a production side in Thailand.
Starting with a week-long repetition, all European safety regulation for OEM and employers alike are updated in four-yearly intervalls.
Having passed resp. exam, I may carry the title of a Certified Machinery Safety Expert – CMSE®.
Having learned constitutional law at the Technical University of Vienna, I took the Chamber's introductory courses, to prepare for the state exam as a Ziviltechniker.
I was sworn in to abide by the guild's obligations before the provincial government of Lower Austria. I am thereby entitled to act as a person of public trust.
2020 | Rezertifizierung zum Certified Machinery Safety Expert – CMSE® |
2019 | 10. Fachtagung Maschinen |
2018 | Maschinenbautage 2018 |
2017 | Normung und Zertifizierung in der Eurasisischen Wirtschaftsunion (Russland, Weißrussland, Kasachstan, Kirgistan, Armenien) — "Spielregeln" des Marktzutritts |
Maschinenbautage 2017 | |
Ausbildung zum/zur Laserschutzbeauftragten für technische Anwendungen | |
Sicherheitsanforderungen und Zulassungsverfahren für Maschinen in Nordamerika | |
2016 | Änderungen und Neuerungen der EN ISO 13849-1 und der EN 14119 |
Ausbildung und Prüfung durch TÜV Nord zum Certified Machinery Safety Expert – CMSE® | |
Maschinenbautage 2016 | |
2015 | Maschinenbautage 2015 |
Sicherheit von Maschinen, Verriegelungseinrichtungen in Verbindung mit trennenden Schutzeinrichtungen nach EN ISO 14119 | |
MBT-Workshop Elektrische Sicherheit | |
Neue Vorschriften im Schaltschrankbau – EN 61439 | |
Brennersteuerung mit Simatic |
2012 | EN 9100 Quality Management Systems – Requirements for Aviation, Space and Defense Organizations |
2011 | Fehlermöglichkeits- und -einflussanalyse – FMEA |
Auslegung sicherer Steurerungen | |
2008 | ATEX- Kompaktschulung |
2006 | Betreiberrichtlinie für den Explosionsschutz – VEXAT |
Conception ,Design&Implementation of Plant Safety | |
Erfahrungsaustausch – Ein Jahr neue Druckgeräteüberwachungsverordnung | |
2005 | Workshop für Maschinen- und Anlagensicherheit |
An Introduction to Plant and Process Safety | |
2003 | Druckgeräterichtlinie |
2002 | CE-Markierung |
1996 | Sicher arbeiten mit NEN 3140 |
1992 | Sichere Auslegung von Steuerungen |
1990 | Unfallverhüten durch richtiges Konstruieren |
2021 | UL Manufacturer's Technical Representative |
2018 | Siemens Certified Professional for Industrial Networks (Siemens CPIN) Security SCALANCE |
Siemens Certified Professional for Industrial Networks (Siemens CPIN) Switching and Routing SCALANCE | |
2017 | Technische Fachschulung zum danfoss VLT® Automation Drive |
Grundlagen und Inbetriebnahme Frequenzumrichter | |
2016 | Schaltschrankbau für Nordamerika |
2015 | Engineering Base Take Off Seminar |
Neue Vorschriften im Schraltschrankbau - EN 61439 | |
2014 | EN 61439 |
2012 | Aufbauschulung ENGINEERING BASE |
2007 | AucoPlan |
Comos PT | |
Schaltschränke für Nordamerika/td> |
2000 | InTouch |
Wonderware | |
E.S.D. in de praktijk | |
SIMATIC S7 voor ervaren SIMATIC S5 programmeurs | |
1999 | ControlLogix |
1996 | Motioncontroller IMC-S |
Veilig werken volgens NEN 3140 | |
1994 | Speicherprogrammierbare Steuerungen |
1993 | Technische Anwendung von Fuzzy Methoden und Neuronalen Netzen |
1991 | Elektromagnetische Verträglichkeit |
Sinec AP/TF | |
1990 | Sinec H1 |
1987 | Hardwareschnittstellen in Rechnersystemen für industrielle Anwendungen |
Softwareschnittstellen in Rechnersystemen für industrielle Anwendungen | |
Lokale Netze Übersicht – Planung und Einführung – Erfahrungen |
2014 | Cleanroom Technology |
Technische Kunststoffe | |
2013 | Schadenskunde und -verhütung |
2008 | FrameMaker8 – Grundlagen |
2002 | Wälzlagerschäden |
Schadensanalyse | |
2001 | MechanicalDesktop |
2000 | Efficiënter werken met vorm- en plaatstoleranties |
2013 | Internationales Vertragsrecht |
2011 | Professionelles Projektmanagement |
2004 | Microsoft Project |
2015 | Arbeitsrecht für Führungskräfte |
Patente lesen und verstehen | |
2013 | Überzeugen und Argumentieren |
MitarbeiterInnenmotivation | |
Internationales Vertragsrecht, Incoterms, Steuerliche Aspekte im Export, Zahlungsmodalitäten im Außenhandel, Exportförderung/Exportfinanzierung | |
Arbeitsrecht für Führungskräfte | |
Unternehmerisches Denken | |
2012 | Sprechtechnik/Rhetorik |
Führen von Mitarbeitergesprächen |
2011 | Führungskräftetraining |
Verkaufsseminar | |
2005 | Führungskräftetraining |
1996 | Quality Service Skills |
1995 | Accounting for Managers |
1993 | The Effective Manager |
Buchhaltung – Bilanz – Steuerrecht | |
1990 | Persönlichkeitsentfaltung |